How this system works:
Vehicle brakes are available as a disc or drum system. They both use resistance and friction to get the job done. Drum brakes are housed in a round drum rotating with the wheel. In the drum are a set of shoes that are forced against the drum when the brake pedal is pressed.
Disc brakes on the other hand have a rotor that is connected to the wheel. Brake pads, attached to calipers grab the rotor when the brake pedal is depressed, causing friction, which stops the wheel.
Brake pads and shoes will wear down over time and require maintenance and replacement to ensure a safe braking system. New brake pads are 8, 10, or 12 mm thick and they should be replaced when they are worn down to 3mm. Rotors and calipers will also need replacement periodically.
Common reasons for this to happen:
- Rotor Run Out: This means that the rotors are moving from side to side more than the maximum allowed amount, which is usually .05mm. A common cause of this is a dirty or rusty disc face. It can also be caused by a “thin spot” on the rotor.
- Uneven Rotors: If the rotors have recently been serviced or new ones have been installed, incorrect tightening can cause the steering wheel to shake when the brakes are applied. Rotors have to be tightened in a specific pattern and to specific torque specifications. If this is not done correctly it can damage the rotors.
- Warped Rotors: A rotor will warp if exposed to extreme stress for an extended period of time. This can be caused by mountain driving, towing or even cold water hitting a hot rotor. Warped rotors will result in brakes that vibrate, or shake.
What to expect:
A top-rated mobile mechanic will come to your home or office to determine the source and cause of the steering wheel shaking when braking issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.
How important is this service?
Any issue with the braking system should be addressed immediately. Brakes that constantly cause a vibration or shaking can affect other brake components, which can run up the cost of the repair. In addition, driving with malfunctioning rotors is simply not safe.