Clutch is not fully disengaging Inspection

SKU 20734 Category

Clutch is not fully disengaging Inspection

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The centre of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.
  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.
  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.
  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it’s done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

Description

Clutch is not fully disengaging Inspection

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The centre of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.
  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.
  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.
  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it’s done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

view our available expert Mobile Mechanics

What our customers have to say about Fixxr

Quick and friendly

He came to do a job after hours and made sure that everything is as it should. He explained every procedure.
Noel
17 June 2025

Brake Pads Car Computer Scan

I had my brake pads replaced and a car computer scan done, and I’m really happy with the service. He was punctual, friendly, and took the time to explain everything clearly. Very insightful and professional throughout the whole process. I’d definitely recommend him to anyone needing reliable car work.
Mbuyselo
9 June 2025

Excellent

Excellent service, knowledgeable and friendly
Ashleigh
30 May 2025

Front Brake Pad Replacement

Maano arrived on time and sorted out my brakes on my Ford Ranger in a jiffy. Cheaper than if I went to the dealer as well and right. Always awesome!
Curtis Young
27 May 2025

Diagnostics and Inspections

Mr. Tony provided outstanding service. He communicated clearly from the start, letting me know exactly when he would arrive. Upon arrival, he quickly began inspecting the car and took the time to explain everything he was doing step by step. I truly appreciated his professionalism and transparency throughout the process. Thanks to his thorough assessment, he was able to identify the root cause of the issue a faulty fuel pump. I’m very grateful for his help and highly recommend his services.
Rilinde Tshivhase
27 May 2025

Knowledgable

Test came on time and and was really quick with servicing my BMW and even went the extra mile to inform me that my brakes needed to be replaced. very friendly and knowledgeable. would definitely trust his work again
Gerald Beckett
14 May 2025

Repair

Norman is excellent as always and resolved the problem quickly and efficiently
Yvonne Butler
13 May 2025

Excellent Service by Tony Da Silva

Tony was assigned to my rescue when my vehicle was not starting in the morning. Initially our appointment was scheduled at 16:30 through our communication during the day we both agreed that he can come at anytime once he has done with his other duties. He arrived an hour early at 15:30. As pro he immediately diagnosed the problem of my vehicle. The problem has been sorted now and the car is able to start smoothly. His level of professionalism and customer oriented is out of this world. Keep up with the good work Tony and Thank you.
Khaya Mnyandu
12 April 2025

Wonderful service

Thank you for the the wonderful service
Jean Dovey
9 April 2025

Other Fixxr Offerings

Price Match Guarentee

We will match and beat any competitors quote.

Service & Maintenance Plans

Keep your  car in top shape all year round without the stress of large upfront payments!

FLeet repair & maintenance

Your fleet is an asset and a money-maker. We offer services for commercial and personal fleets, keeping your wheels on the road.

Not Ready to Book? Request a quote Instead

Not Seeing the Right Option? Tell Us What’s Going On